Description

LOST MARY BM6000 DISPOSABLE KIT

The Lost Mary BM6000 is a TPD-compliant 6000-puff rechargeable, cost-effective mouth-to-lung (MTL) vaping system with an upgraded mesh coil to fully maximise and produce an intense flavour, offering extended longevity of up to ten times the use of a common 600-puff disposable vape.

Prefilled with 20 mg (2%) nicotine-strength e-liquid. Accompanying its prefilled integrated 2 ml pod is a 10 ml e-liquid refill container. It utilises an optimised auto-fill structure and

visible e-liquid window to keep you topped up on the go.

This clever setup includes a display screen that shows the remaining battery life of its sizeable 650 mAh battery. The battery can be rapidly recharged through Type-C USB charging

. Moreover, the BM6000 is designed so the battery can be easily removed and responsibly recycled.

This disposable kit is designed to provide up to approximately 6000 puffs, with the actual number of puffs depending on the length of each draw. Taking longer draws may result in lower puff counts.

Key Features

• TPD-compliant 6000 puffs
• Upgraded mesh coil
• Detachable battery for recycling
• Visible e-liquid level
• Rechargeable 650 mAh battery
• Power display screen

Ultimate Upgrade

The upgraded mesh coil featured in the Lost Mary BM6000 is designed to enhance the flavour and minimise e-liquid loss while vaporising the enclosed nic salt e-liquid.

Enjoy more puffs with its optimised auto-fill system that maximises every drop of e-liquid, providing the best value per puff for such a device on the market.

Big Puffs

The Lost Mary BM6000 can produce up to approximately ten times the number of puffs as its single-use counterpart, the Lost Mary BM600 or Lost Mary BM600S.

BM6000 Setup

Follow these simple steps to set up your BM6000 device:

• Push down and twist to remove the cap from the 10 ml refill container.
• Pull and remove the rubber plug found within the main section of the BM6000 device.
• Position and slide the refill container into place, ensuring it is flush and fully installed within the device’s body.
• Turn upside down and wait for approximately ten seconds.
• Allow up to 5 minutes for the e-liquid to saturate the in-built coil before use.
• Inhale on the mouthpiece and enjoy!

Note: To charge the internal 650 mAh battery, plug a Type-C compatible USB charging cable into the device’s port.

Recycling

Unlike the common disposable single-use vape, the BM6000 device is designed to be easily dismantled to recycle the battery responsibly.

Press the corner where the battery is held to release it from the main device. Batteries can be recycled in dedicated battery recycling bins at your local vape shop or supermarket.

Alternatively, find your nearest recycling location for electrical waste, where you can recycle your vape battery and save precious resources that would otherwise go to landfills.

What’s the difference between DTL and MTL?

DTL, or Direct to Lung, is a more powerful style of vaping that produces more vapour. The coils it includes have a lower resistance, and are called sub-ohm coils. They are anything under 1.0 Ohm but are usually 0.5 Ohm – the higher the number, the more resistance and the tighter the draw due to a bigger hole through the middle of the coil that the air travels through. This style of vaping is achieved by drawing the vapour straight into your lungs. It is recommended that you use an e-liquid with a higher VG content, for example 60% VG or above. This is because VG causes the liquid to be thicker, and more powerful coils will burn through thinner liquid more quickly, causing you to use much more.

MTL, or Mouth to Lung, feels more like a cigarette and is less powerful. It produces a more discrete amount of vapour. It includes coils with higher resistance, and are anything above 1.0 Ohm, giving it a tighter draw due to the smaller hole in the middle of the coil that the air travels through. This style of vaping is achieved by drawing vapour first into your mouth and then into your lungs. It is recommended that you use an e-liquid with a lower VG content, such as 50% or below. This is because lower power coils won’t be able to burn through thicker juices fast enough, causing the coil to clog up and burn more quickly.