FreeMax Marvos MS-D Coils

The Freemax Marvos MS-D Mesh replacement coils have been designed for DTL (Direct To Lung) vaping and are compatible with the Marvos X. Each one is built with a mesh design, so that your e-liquid heats up more quickly and you experience improved flavour on every puff. To match these sub ohm coils, we’d recommend using them with a 70% VG e-liquid or higher.

This 0.25 Ohm coil is best vaped around 40 – 60W.

What’s the difference between DTL and MTL?

DTL, or Direct to Lung, is a more powerful style of vaping that produces more vapour. The coils it includes have a lower resistance, and are called sub-ohm coils. They are anything under 1.0 Ohm but are usually 0.5 Ohm – the higher the number, the more resistance and the tighter the draw due to a bigger hole through the middle of the coil that the air travels through. This style of vaping is achieved by drawing the vapour straight into your lungs. It is recommended that you use an e-liquid with a higher VG content, for example 60% VG or above. This is because VG causes the liquid to be thicker, and more powerful coils will burn through thinner liquid more quickly, causing you to use much more.

MTL, or Mouth to Lung, feels more like a cigarette and is less powerful. It produces a more discrete amount of vapour. It includes coils with higher resistance, and are anything above 1.0 Ohm, giving it a tighter draw due to the smaller hole in the middle of the coil that the air travels through. This style of vaping is achieved by drawing vapour first into your mouth and then into your lungs. It is recommended that you use an e-liquid with a lower VG content, such as 50% or below. This is because lower power coils won’t be able to burn through thicker juices fast enough, causing the coil to clog up and burn more quickly.