Description

Please know your ohms law before purchasing, this is NOT a Tank and will require the user to build their own coils in order to work.

Wotofo STNG – MTL RDA

The Wotofo STNG MTL RDA is a fantastically performing RDA device with some unique features compared to most other RDA Devices.

MTL Focused

Firstly, it has an MTL Focused drip tip which allows for a rich thick vapour experience combining RDA with MTL. It also creates this beautiful design and it really fits well with the rest of the device.

Air Flow

The STNG MTL RDA features a droplet shaped airflow control slider, allowing for free and easy air flow control for the user. The airflow control is only on one side, so be sure to put the correct side of the outer housing onto the deck when building.

Single Airflow Split to Dual Channels

Once the airflow enters the single vent, it is split into dual channels providing the coil with optimal cooling, it is supplied directly to the bottom of the coil and will result in a soft and safe vaporisation.

Ease of Installation

Installing your coil on the STNG RDA is very easy. It is fitted with spring loaded post clamps which allow you to just slightly unscrew them with a Philips screwdriver, giving you space to insert your coil, then tighten once again, and your coil will be ready to be wicked right above the air flow.

Squonk Friendly

The STNG MTL RDA is both simple and compact but also advanced, it’s bottom feeding it adopted to make juice feeding much easier. It’s MTL design makes it difficult to fill through the drip tip, although you can easily remove the drop tip to fill, the option to use this device with a Squonker mod is in place by default, but if you would rather drip – Just replace the Squonk pin from the bottom of the STNG RDA with the solid pin included in the accessory bag

Read Review

Watch Review

Manufacturer Article